Table of Contents
Advertisement
Configure date and time
Figure 98
Configure parameters
2. Click OK to save and activate changes.
Perform this procedure to configure product date and time.
1. Select Switch and Date & Time from the Configure menu at any
view. The Date Time View displays
Date Time View
a. Click Date fields that require change, and type numbers in the
following ranges:
• Month (MM): 1 through 12.
• Day (DD): 1 through 31.
• Year (YYYY): greater than 1980.
b. Click Time fields that require change, and type numbers in the
following ranges:
• Hour (HH): 0 through 23.
• Minute (MM): 0 through 59.
• Second (SS): 0 through 59.
2. Click OK to save and activate changes.
Perform this procedure to configure product operating parameters.
1. Set the product offline. Refer to
page 334 for instructions.
2. Select Switch and Parameters from the Configure menu at any view.
The Parameters View displays
(Figure
98).
Set the switch online or offline
(Figure
99).
Chapter 2: Installation tasks
on
159
Advertisement
Table of Contents
