Table of Contents
Advertisement
The bound WWN must be entered in the form of a raw WWN format
(XX:XX:XX:XX:XX:XX:XX:XX) or must be a valid nickname. Ensure
a valid WWN or nickname is entered.
Did configuring the WWN or nickname solve the problem?
NO
YES
↓
The switch appears operational. Exit MAP.
Contact the next level of support. Exit MAP.
22
As indicated by a message or event code 081, a port has an invalid
attachment. The information in the Port Properties dialog box
specifies the reason as listed in the following table.
Reason
Unknown
ISL connection not allowed on this port.
Incompatible switch at other end of ISL.
External loopback adapter connected to the
port.
N-Port connection not allowed on this port.
Non-IBM switch at other end of the ISL.
Port binding violation - Unauthorized WWN.
Unresponsive node connected to port.
ESA security mismatch
Fabric binding mismatch
Authorization failure reject
Unauthorized switch binding WWN
Fabric mode mismatch
CNT WAN extension mode mismatch
Action
Contact the next level of
support.
Go to
step
23.
Go to
step
24.
Go to
step
25.
Go to
step
23.
Go to
step
24.
Go to
step
21.
Go to
step
27.
Go to
step 29
Go to
step 30
Go to
step 27
Go to
step 31
Go to
step 24
Go to
step 32
Chapter 3: Diagnostics
255
Advertisement
Table of Contents
