Table of Contents
Advertisement
Figure 147
262
SAN32M-1 Installation and Service Manual
d. Update the Fabric Membership List for both elements to ensure
interswitch compatibility, then click Next. The third Fabric Binding
dialog box displays.
Fabric binding dialog box (third)
e. At the third Fabric Binding dialog box, ensure the Fabric
Membership List is updated and correct for each switch, then
click Activate for each switch. The fabric binding feature is
consistently enabled for both switches.
Did updating the fabric membership lists solve the problem?
NO
YES
↓
The switch appears operational. Exit MAP.
Contact the next level of support. Exit MAP.
31
A port connection is not allowed because of a switch binding
mismatch. Switch membership lists must be compatible for both
fabric elements.
a. At the Hardware View for each switch, click Configure and select
Switch Binding and Edit Membership List. The Switch Binding -
Membership List dialog box displays.
Advertisement
Table of Contents
