Table of Contents
Advertisement
MAP 0200: POST, reset, or IPL failure analysis
210
SAN32M-1 Installation and Service Manual
A CTP card failure is indicated. Because the CTP card is not a FRU,
replace the switch
20
Does the EFCM Basic interface appear operational?
NO
YES
↓
Go to
step
22.
21
A Page cannot be found, Unable to locate the server, HTTP 404 -
file not found, or other similar message appears. The message
indicates the web browser PC cannot communicate with the switch
because:
•
The switch-to-PC Internet (Ethernet) link could not be
established.
•
AC power distribution in the switch failed, or AC power was
disconnected.
•
The switch CTP card failed.
Go to
step
12.
22
Inspect the power supply operational states at the EFCM Basic
interface.
a. At the View panel, click the Component Properties tab. The View
panel (Component Properties tab) displays.
b. Inspect the State fields for Power Supply 0 and Power Supply
1.
Does the State field display a Failed or Not Installed message for
either power supply?
NO
YES
↓
A redundant power supply failure is indicated. Go to
The switch appears operational.
When the switch is powered on, it performs a series of power-on
self-tests (POSTs). When POSTs complete, the switch performs an
step
6.
Advertisement
Table of Contents
