Table of Contents
Advertisement
Back up the configuration
346
SAN32M-1 Installation and Service Manual
•
Operating parameters (loop mode, error-detect time-out value
(E_D_TOV), resource allocation time-out value (R_A_TOV), and
preferred domain ID).
•
Simple network management protocol (SNMP) configuration
information, including trap recipients, community names, and
write authorizations.
•
Zoning configuration information, including the active zone set
and default zone state.
NOTE: The switch must be set offline prior to restoring or resetting the
configuration file.
NOTE: The figures in the following procedures are examples. The product
names shown in the figures may not be the same as the product names you
see on your screen. The product names on your screen are correct.
To back up the switch configuration file to the EFC Server:
1. At the EFC Server, open the EFC Manager application. The
Product View displays.
2. Select the icon representing the switch for which a configuration
file is to be backed up. The Hardware View for the selected switch
displays.
3. At the navigation control panel, select Backup & Restore
Configuration from the Maintenance menu. The Backup and Restore
Configuration dialog box displays.
4. Click Backup. When the backup process finishes, the Backup
Complete dialog box displays.
Advertisement
Table of Contents
