Table of Contents
Advertisement
Configure and enable E-mail notification
Figure 84
142
SAN32M-1 Installation and Service Manual
e. Type a decimal port number in the associated UDP Port
Number field to override the default.
2. To enable or disable transmission of authorization trap messages
to unauthorized management workstations trying to access
SNMP information through the management server, select the
Enable Authorization Traps check box. A check mark in the box
enables transmission.
3. Click Activate to save the information and close the dialog box.
Perform this procedure to configure and enable e-mail addresses and
simple mail transfer protocol (SMTP) server addresses to receive
e-mail notification of switch (and other managed product) events.
The addresses must be configured at the SAN management
application, then enabled through the Element Manager application.
Refer to
Task 23: Test remote notification (optional)
instructions on testing this notification feature. To configure and
enable e-mail and SMTP server addresses:
1. Close the Hardware View and return to the Products View by
clicking close (X) at the upper right corner of the window.
2. Select Configure E-Mail from the Maintenance menu. The Configure
E-Mail dialog box displays
Configure E-Mail dialog box
on page 152 for
(Figure
84).
Advertisement
Table of Contents
