Table of Contents
Advertisement
19–18
Length
11.
INSTALL GENERATOR ROTOR ASSY
(a)
Install the generator rotor.
(b)
Install the alternator washer to the rotor.
B
Cord Clip
A
13.
INSTALL GENERATOR HOLDER W/RECTIFIER
(a)
Install the rectifier holder while pushing it with the 4 screws.
Torque: 2.9 N m (30 kgf cm, 26 in. lbf)
2002 CAMRY REPAIR MANUAL (RM881U)
STARTING & CHARGING
10.
(a)
If the exposed length is less than minimum, replace the brush
holder assembly.
P13535
12.
17 mm
(a)
Socket
Wrench
A51920
(b)
A
(c)
A
B11366
(d)
Inside
NOTICE:
Be careful of the rubber insulators installation direction.
A51921
–
GENERATOR ASSY (2AZ–FE)
INSPECT BRUSH
Using vernier calipers, measure the exposed brush
length.
Standard exposed length:
9.5 – 11.5 mm (0.374 – 0.453 in.)
Minimum exposed length: 1.5 mm (0.059 in.)
INSTALL ALTERNATOR RECTIFIRE END FRAME
Using a 17 mm socket wrench and press, slowly press in
the rectifier end frame.
Install the cord clip and 4 nuts.
Torque:
Nut A 4.5 N m (46 kgf cm, 39 in. lbf)
Nut B 5.4 N m (55 kgf cm, 47 in. lbf)
Install the seal plate on the rectifier end frame.
Install the 4 rubber insulators on the lead wires.
Author :
Date :
1890
Advertisement
Table of Contents
