Table of Contents
Advertisement
SUPPLEMENTAL RESTRAINT SYSTEM
Battery
SST
10 m (33 ft) or more
2002 CAMRY REPAIR MANUAL (RM881U)
–
FRONT SEAT AIRBAG ASSY RH
(b)
Remove the front seat assy (See page 72–7).
(c)
Disconnect the front seat airbag connector.
NOTICE:
When handling the airbag connector, take care not to
damage the airbag wire harness.
H41647
(d)
Install the SST.
(1)
Connect the connectors of the 2 SST connector to
the front seat airbag connector.
SST
09082–00700, 09082–00750
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
H41648
(2)
Move the SST to at least 10 m (33 ft) away from the
front of the vehicle.
(3)
Close all the doors and windows of the vehicle.
NOTICE:
Take care not to damage the SST wire harness.
(4)
Connect the red clip of the SST to the battery posi-
tive (+) terminal and the black clip of the SST to the
battery negative (–) terminal.
(e)
Deploy the airbag.
H40007
(1)
Confirm that no one is inside the vehicle or within 10
m (33 ft) area around the vehicle.
(2)
Press the activation switch of the SST and deploy
the airbag.
HINT:
The airbag deploys simultaneously as the LED of the SST ac-
tivation switch lights up.
(f)
Dispose of the front seat airbag assy.
CAUTION:
S
The front seat airbag assy is very hot when the airbag
is deployed, so leave it alone for at least 30 minutes
after deployment.
S
Use gloves and safety glasses when handling a front
seat airbag assy with the deployed airbag.
S
When moving a vehicle for scrapping which has a
front seat airbag assy with the deployed airbag, use
gloves and safety glasses.
S
Do not apply water, etc. to a front seat airbag assy
with the deployed airbag.
S
Always wash your hands with water after completing
the operation.
Author :
Date :
60–51
2434
Advertisement
Table of Contents
