Table of Contents
Advertisement
Disconnect
Hook
Pin
Plunger
Push
Seal Packing
Nut
13.
INSTALL IGNITION COIL ASSY
Torque: 9.0 N m (92 kgf cm, 80 in. lbf)
14.
INSTALL FRONT WHEEL RH
Torque: 103 N m (1,050 kgf cm, 76 ft lbf)
15.
INSPECT OIL LEAK
ENGINE MECHANICAL
(3)
Turn
A52463
(4)
Turn
A52464
12.
INSTALL CYLINDER HEAD COVER SUB–ASSY
(a)
Remove any old packing (FIPG) material.
(b)
Apply seal packing to 2 locations as shown in the illustra-
tion.
Seal packing: Part No. 08826–00080 or equivalent
NOTICE:
S
Remove any oil the contact surface.
S
Install the cylinder head cover within 5 minutes after
applying seal packing.
S
Do not put into engine oil 2 hours after installing.
A53051
(c)
Install the cylinder head cover with the 8 bolts and 2 nuts.
Torque: 11 N m (110 kgf cm, 8 ft lbf)
Nut
A61989
–
VALVE CLEARANCE (2AZ–FE)
Turn the crankshaft counterclockwise, and discon-
nect the plunger knock pin from the hook.
Turn the crankshaft clockwise, and check that the
slipper is pushed by the plunger.
Author :
14–13–2
Date :
1537
Advertisement
Table of Contents
