Table of Contents
Advertisement
30–16
SST
SST
38.
INSTALL FR AXLE INBOARD JOINT BOOT
(a)
Install the front axle inboard joint boot to the front drive outboard joint shaft assy LH.
2002 CAMRY REPAIR MANUAL (RM881U)
DRIVE SHAFT / PROPELLER SHAFT
(c)
(d)
NOTICE:
Do not overtighten the SST.
C91604
(e)
C91605
37.
(a)
(b)
(c)
Matchmarks
NOTICE:
Do not tap the roller.
C67417
(d)
(e)
39.
(a)
F07391
–
FRONT DRIVE SHAFT
Place SST onto the front drive shaft damper RH clamp.
SST
09521–24010
Tighten the SST so that the front drive shaft damper RH
clamp is pinched.
Using SST, adjust the clearance of the front drive shaft
damper RH clamp.
SST
09240–00020
Crearance: 0.5 – 1.2 mm (0.020 – 0.047 in.)
INSTALL FRONT DRIVE INBOARD JOINT ASSY LH
Place the beveled side of the tripod axial spline toward the
front drive outboard joint shaft assy LH.
Align the matchmarks placed before removal.
Using a brass bar and hammer, tap in the tripod to the
front drive outboard joint shaft assy LH.
Using a snap ring expander, install a new front drive inner
shaft inner RH shaft snap ring.
Pack the front drive outboard joint shaft assy LH and front
axle inboard joint boot with grease in the boot kit.
Grease capacity:
185 – 195 g (6.5 – 6.9 oz.)
INSTALL FRONT AXLE INBOARD JOINT BOOT
CLAMP
Using pliers, pinch the claws to compress the front axle
inboard joint boot LH No.2 clamp and engage the other
claws.
Author :
Date :
1970
Advertisement
Table of Contents
