30–32
15.
INSTALL REAR AXLE HUB & BEARING ASSY LH
(See page 30–28)
2002 CAMRY REPAIR MANUAL (RM881U)
DRIVE SHAFT / PROPELLER SHAFT
11.
(a)
NOTICE:
When removing bolt, stop the bolt from rotating and loosen
the nut.
C83019
12.
(a)
NOTICE:
When installing bolt, stop the bolt from rotating and torque
the nut.
HINT:
C83019
Insert the bolt from the rear side of the vehicle and install the
nut.
13.
(a)
HINT:
Insert the bolt from the front side of the vehicle and while fixing
the nut, turn and install the bolt.
C83018
14.
(a)
HINT:
Insert the bolt from the rear side of the vehicle and while fixing
the nut, turn and install the bolt.
C83017
–
REAR AXLE CARRIER SUB–ASSY LH
REMOVE REAR AXLE CARRIER SUB–ASSY LH
Remove the 2 bolts, nuts and rear axle carrier sub–assy
LH from the shock absorber assy rear LH.
INSTALL REAR AXLE CARRIER SUB–ASSY LH
Install the rear axle carrier sub–assy LH with the 2 bolts
and nuts.
Torque: 255 N m (2,600 kgf cm, 188 ft lbf)
TEMPORARY TIGHTEN REAR SUSPENSION ARM
ASSY NO.1 LH
Install the rear suspension arm No.1 to the rear axle carri-
er sub–assy LH with the bolt and nut, temporarily tighten
the bolt.
TEMPORARY TIGHTEN REAR SUSPENSION ARM
ASSY NO.2 LH
Install the rear suspension arm No.2 to the rear axle carri-
er sub–assy LH with the bolt and nut, temporarily tighten
the bolt.
Author :
Date :
1986