Table of Contents
Advertisement
37.
INSTALL REAR DISC BRAKE PAD SUPPORT PLATE
(a)
Install the rear disc brake pad support plate No.1.
38.
INSTALL REAR DISC BRAKE PAD SUPPORT PLATE
(a)
Install the rear disc brake pad support plate No.2.
39.
INSTALL REAR DISC BRAKE ANTI SQUEAL SHIM KIT
(a)
Coat the both sides of No.1 anti–squeal shim with pad grease all over, and install the shim together
with No.2 anti–squeal shim to each pad.
(b)
TMC made:
Install the 2 pad wear indicator plates to the each of 2 brake pads.
NOTICE:
When replacing worn pads, the anti–squeal shims must be replaced together with the pads.
(c)
TMMK made:
Install the pad wear indicator plate to the inner pad.
NOTICE:
When replacing worn pads, the anti–squeal shims must be replaced together with the pads.
40.
INSTALL DISC BRAKE PAD KIT REAR (PAD ONLY)
(a)
Install the 2 brake pads with the anti–squeal shim.
NOTICE:
There should be no oil or grease on to the friction surface of the pads and the disc.
41.
INSTALL DISC BRAKE CYLINDER ASSY RR LH(TMC MADE)
(a)
Apply the lithium soap base glycol grease to the cylinder slide pin.
(b)
Install the disc brake cylinder assembly rear LH to the cylinder slide pin.
42.
INSTALL REAR DISC BRAKE CYLINDER SLIDE PIN
(a)
Apply the lithium soap base glycol grease to the cylinder slide pin.
(b)
Install and torque the cylinder slide pin to the disc brake cylinder assembly.
Torque:
TMC made: 34.3 N m (350 kgf cm, 25 ft lbf)
TMMK made: 43 N m (440 kgf cm, 32 ft lbf)
43.
CONNECT REAR LH FLEXIBLE HOSE
(a)
Connect a new gasket and flexible hose with the union bolt.
Torque: 29.4 N m (300 kgf cm, 22 ft lbf)
44.
FILL RESERVOIR WITH BRAKE FLUID
45.
BLEED MASTER CYLINDER(See page 32–4)
SST
09023–00100
46.
BLEED BRAKE LINE(See page 32–4)
47.
CHECK FLUID LEVEL IN RESERVOIR
48.
CHECK BRAKE FLUID LEAKAGE
49.
INSTALL REAR WHEEL
Torque: 103 N m (1,050 kgf cm, 76 ft lbf)
2002 CAMRY REPAIR MANUAL (RM881U)
BRAKE
–
REAR DISC BRAKE
Author :
32–37
Date :
2025
Advertisement
Table of Contents
