Table of Contents
Advertisement
15–2
Removal & Installation and Disassembly & Reassembly
1.
REMOVE OXYGEN SENSOR
(a)
Disconnect the oxygen sensor connecter.
(b)
Remove the oxygen sensor.
2.
REMOVE EXHAUST PIPE NO.1 SUPPORT BRACKET
(a)
Remove the 2 nuts and support bracket.
3.
REMOVE EXHAUST PIPE NO.1 SUPPORT BRACKET
(a)
Remove the 2 bolts and support bracket.
4.
REMOVE EXHAUST PIPE ASSY FRONT
5.
REMOVE FLOOR PANEL BRACE REAR
(a)
Remove the 2 bolts and floor panel brace rear.
6.
REMOVE EXHAUST PIPE ASSY CENTER
7.
REMOVE EXHAUST PIPE DAMPER(A/T TRANSAXLE)
8.
REMOVE TAIL PIPE ASSY
9.
INSTALL TAIL PIPE ASSY
Exhaust Pipe Damper
Exhaust Pipe Assy Center
11.
INSTALL EXHAUST PIPE ASSY CENTER
(a)
Install a new gasket and the center pipe to the tail pipe.
Torque: 56 N m (571 kgf cm, 41 ft lbf)
12.
INSTALL FLOOR PANEL BRACE REAR
Torque: 19.5 N m (199 kgf cm ,14 ft lbf)
13.
INSTALL EXHAUST PIPE ASSY FRONT
(a)
Install a new gasket, install front pipe to center pipe.
Torque: 56 N m (571 kgf cm, 41 ft lbf)
(b)
Install a new gasket and the front pipe to exhaust manifold converter.
Torque: 62 N m (633 kgf cm, 46 ft lbf)
2002 CAMRY REPAIR MANUAL (RM881U)
EXHAUST
–
EXHAUST PIPE (2AZ–FE)
10.
INSTALL EXHAUST PIPE DAMPER(A/T TRANSAXLE)
(a)
Install the exhaust pipe damper with the 2 bolts.
Torque: 19 N m (194 kgf cm, 14 ft lbf)
HINT:
Be careful not to install the damper in the wrong direction.
A60822
Author :
Date :
1500J–02
1815
Advertisement
Table of Contents
