Coolant (1Mz-Fe) Replacement - Toyota 2002 Camry Service Manual

16–20
COOLANT (1MZ–FE)
REPLACEMENT
Radiator Drain Plug
2. ADD COOLANT
(a) Slowly fill the system with coolant.
HINT:
S
Use of improper coolants may damage engine cooling system.
S
Use "Toyota Long Life Coolant" or equivalent and mix it with plain water according to the manufactur-
er's directions.
S
Using of coolant with includes more than 50 % (freezing protection down to –35_C (–31_F) or 60 %
(freezing protection down to –50_C (–58_F)) of ethylene–glycol is recommended but not more than
70 %.
NOTICE:
S
Do not use an alcohol type coolant or plain water alone.
S
The coolant should be mixed with plain water (preferably demineralized water).
Capacity: 9.2 liters (9.7 US qts, 8.1 lmp. qts)
3. CHECK ENGINE COOLANT LEAK
(a) Fill the radiator with coolant and attach a radiator cap tester.
(b) Pump it to 118 kPa (1.2 kgf/cm
2002 CAMRY REPAIR MANUAL (RM881U)
COOLING
1.
(a)
CAUTION:
Water Drain Plug
To avoid the danger of being burned, do not remove the ra-
diator cap while the engine and radiator are still hot, as fluid
and steam can be blown out under pressure.
Drain Cock Plug
(b)
A63439
2
), and check leakage.
– COOLANT (1MZ–FE)
DRAIN COOLANT
Remove the radiator cap from the water outlet.
Loosen the radiator drain plug and drain the coolant.
Author :
16038–02
Date :
1839