Table of Contents
Advertisement
14–80
Timing Mark
Mark Link
Groove
90_
2002 CAMRY REPAIR MANUAL (RM881U)
ENGINE MECHANICAL
(c)
Mark Link
(d)
(e)
Timing Mark
A52510
(f)
Groove
A52511
(g)
(h)
A52512
(i)
A36525
–
CHAIN (2AZ–FE)
Align the mark links (yellow colored links) with the timing
marks of the gear as shown in the illustration.
Insert the gears with chain to the crankshaft and oil pump
shaft.
Temporarily tighten the oil pump drive shaft gear by a nut.
Inset the damper spring into the adjusting hole, and install
the chain tensioner plate by a nut.
Torque: 12 N m (122 kgf cm, 9 ft lbf)
Align an adjusting hole of the oil pump drive shaft gear
with the groove of the oil pump.
Put a bar (φ4mm) in the adjusting hole of the oil pump
drive shaft gear to lock in position, and assemble a nut.
Torque: 30 N m (301 kgf cm, 22 ft lbf)
Rotate the crankshaft counterclockwise 90_, and align
the crankshaft key to the top.
Author :
Date :
1604
Advertisement
Table of Contents
