Table of Contents
Advertisement
11–40
8.
REMOVE FUEL PUMP CUSHION RUBBER
9.
REMOVE FUEL PRESSURE REGULATOR ASSY
10.
REMOVE FUEL PUMP ASSY W/FILTER
(a)
Disconnect the fuel pump connector from the fuel pump.
(b)
Pull out the fuel filter and the fuel pump assembly.
11.
REMOVE FUEL PUMP FILTER
(a)
Using a screwdriver, remove the fuel pump filter clip and the fuel pump filter.
12.
REMOVE FUEL SUCTION PLATE SUB–ASSY
(a)
Using a screwdriver, disconnect the snap claws from the claw holes and remove the fuel suction plate.
13.
REMOVE FUEL SENDER GAGE ASSY
(a)
Unlock the sender gage, and move it downward to remove.
14.
REMOVE FUEL PUMP HARNESS
(a)
Disconnect the connector, and remove the fuel pump harness.
15.
INSTALL FUEL SENDER GAGE ASSY
(a)
Lock the sender gage by pushing it upward.
NOTICE:
By pushing the sender gage downward, confirm that it is certainly locked.
16.
INSTALL FUEL PUMP FILTER
(a)
Install the fuel pump filter with a new fuel pump filter clip.
17.
INSTALL FUEL PRESSURE REGULATOR ASSY
(a)
Apply gasoline to a new O–ring, and install it to the pressure regulator.
(b)
Insert the pressure regulator.
18.
INSTALL FUEL SUCTION TUBE ASSY W/ PUMP & GAGE
(a)
Install a new gasket and fuel suction tube w/pump & gage.
2002 CAMRY REPAIR MANUAL (RM881U)
FUEL
–
FUEL PUMP ASSY (1MZ–FE)
19.
INSTALL FUEL TANK VENT TUBE SET PLATE
(a)
Install the fuel tank vent tube set plate with the 8 bolts.
Torque: 3.5 N m (36 kgf cm, 31 in. lbf)
A52586
Author :
Date :
1484
Advertisement
Table of Contents
