Table of Contents
Advertisement
Retainer
(at 4 places)
Fuel Pipe
Clamp No.1
A
2002 CAMRY REPAIR MANUAL (RM881U)
FUEL
SST
A60818
B09615
(e)
A60083
A
B12941
B12944
–
FUEL SYSTEM (2AZ–FE)
(2)
Find the metallic connector of the fuel tube assem-
bly, pull it out towards the rear and hold it as it is.
(3)
Assemble SST to the connection as shown.
SST
09268–21010
(4)
Turn SST, align the retainers inside the connector
with SST chamfered parts and insert SST into the
connector.
(5)
Slide SST and the connector together towards the
fuel tube assembly.
Observe these following precautions when disconnecting
the fuel tube connector (quick type).
(1)
Remove the fuel pipe clamp No.1.
(2)
Check if there is any dirt like mud on the pipe and
around the connector before disconnecting them
and clean the dirt away.
(3)
Disconnect the connector from the hose while
pinching part A with fingers as shown in the illustra-
tion.
(4)
When the connector and the pipe are stuck, pinch
the fuel pipe between the hands, push and pull the
connector to free to disconnect and pull it out. Do
not use any tool at this time.
(5)
Inspect if there is any dirt or the likes on the seal sur-
face of the disconnected pipe and clean it away.
Author :
11–3
Date :
1447
Advertisement
Table of Contents
