26–8
1
2
2002 CAMRY REPAIR MANUAL (RM881U)
FRONT SUSPENSION
–
(e)
Adjust the camber by pushing or pulling the lower side of
the shock absorber in the direction in which the camber
adjustment is required.
(f)
Tighten the nuts.
Torque: 210 N m (2,141 kgf cm, 155 ft lbf)
NOTICE:
When installing nut, stop the bolt from rotating and torque
the nut.
(g)
Install the front wheel.
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
(h)
Check the camber.
HINT:
S
Try to adjust the camber to the center of the specified val-
ue.
S
Adjusting value for the set bolts is 6' – 30' (0.1° – 0.5°).
If the camber is not within the specified value, using the follow-
ing table, estimate how much additional camber adjustment will
be required, and select the camber adjusting bolt.
C93869
NOTICE:
Tighten the adjusting bolt with a washer and a new nut.
Bolt
Adjusting
Value
15'
30'
45'
1_00'
1_15'
1_30'
(i)
Do the steps mentioned above again. At step (b), replace
1 or 2 selected bolts.
HINT:
When replacing the 2 bolts, replace 1 bolt for each time.
FRONT WHEEL ALIGNMENT
Set Bolt
90105–17008 90105–17009 90105–17010 90105–1701 1
1 Dot
1
2
1
Author :
Adjusting Bolt
3 Dots
2 Dots
2
1
2
1
Date :
2
1920