Table of Contents
Advertisement
14–13–1
Tighten
7 Links
Paint Mark
Timing Marks
Raise
Push
Hook
Pin
ENGINE MECHANICAL
(t)
Fix
NOTICE:
Be careful not to damage the valve lifter.
A52459
(u)
Paint Mark
Timing Mark
Groove
A52460
(v)
A52461
NOTICE:
When installing the tensioner, set the hook again if the
hook releases the plunger.
Engine
Front
A52462
–
VALVE CLEARANCE (2AZ–FE)
Fix the camshaft with a spanner and so on, then tighten
the camshaft timing gear set bolt.
Torque: 54 N m (551 kgf cm, 40 ft lbf)
As shown in the illustration, check the matchmarks on the
timing chain and camshaft timing sprockets and the align-
ment of the pulley groove with timing mark of the chain
cover.
Install chain tensioner.
(1)
Release the ratchet pawl, fully push in the plunger
and apply the hook to the pin so that the plunger
cannot spring out.
(2)
Install a new gasket and chain tensioner with the 2
nuts.
Torque: 9.0 N m (92 kgf cm, 80 in. lbf)
Author :
Date :
1536
Advertisement
Table of Contents
