Table of Contents
Advertisement
SST
Hold
9.
DISCONNECT FRONT AXLE ASSY LH
(a)
Using a plastic hammer, disconnect the front drive shaft assy LH from the front axle hub sub–assy LH.
NOTICE:
w/ ABS:
Be careful not to damage the boot and speed sensor rotor.
2002 CAMRY REPAIR MANUAL (RM881U)
DRIVE SHAFT / PROPELLER SHAFT
F40147
Turn
C92142
F40142
SST
C83850
–
FRONT DRIVE SHAFT
(c)
Remove the bolt, disconnect the speed sensor front LH
from the steering knuckle LH.
7.
DISCONNECT TIE ROD ASSY LH
(a)
Remove the cotter pin and nut.
(b)
Using SST, disconnect the tie rod assy LH from the steer-
ing knuckle LH.
SST
09628–62011
8.
DISCONNECT
SUB–ASSY LOWER NO.1 LH
(a)
Remove the bolt and 2 nuts, and disconnect the front sus-
pension arm sub–assy lower No.1 LH from the lower ball
joint assy front LH.
10.
REMOVE FRONT DRIVE SHAFT ASSY LH
(a)
Using SST, remove the front drive shaft assy LH.
SST
09520–01010, 09520–24010 (09520–32040)
NOTICE:
Be careful not to damage the oil seal.
Author :
FRONT
SUSPENSION
Date :
30–9
ARM
1963
Advertisement
Table of Contents
