Table of Contents
Advertisement
AUTOMATIC TRANSMISSION / TRANS
Dimension B
A
B
C
C
2002 CAMRY REPAIR MANUAL (RM881U)
–
(c)
Using vernier calipers and a straight edge, measure the
dimension "B" shown in the illustration and check that "B"
is greater than "A" measured in (b).
Standard: A + 1 mm or more
NOTICE:
Do not add the thickness of straight edge.
19.
INSTALL AUTOMATIC TRANSAXLE ASSY
C65911
(a)
Install the automatic transaxle and 9 bolts to the engine.
A
Torque:
Bolt A: 64 N m (650 kgf cm, 47 ft lbf)
A
Bolt B: 46 N m (470 kgf cm, 34 ft lbf)
Bolt C: 44 N m (449 kgf cm, 32 ft lbf)
(b)
Apply a few drops of adhesive to each 2 threads on the
B
tip of the 6 torque converter clutch mounting bolts.
Adhesive: Part No. 08833–00070, THREE BOND 1324
C
C
or equivalent
C96139
(c)
Install the 6 torque converter clutch mounting bolts.
Torque: 41 N m (420 kgf cm, 30 ft lbf)
HINT:
First install green colored bolt and then the other 5 bolts.
D25408
20.
INSTALL FLYWHEEL HOUSING UNDER COVER
(a)
Install the flywheel housing under cover.
D25407
21.
INSTALL TRANSVERSE ENGINE ENGINE MOUNTING
BRACKET
(a)
Install the engine mounting bracket FR and 3 bolts to the
automatic transaxle.
Torque: 64 N m (653 kgf cm, 47 ft lbf)
D25420
AUTOMATIC TRANSAXLE ASSY (2AZ–FE)
Author :
40–17
Date :
2092
Advertisement
Table of Contents
