Table of Contents
Advertisement
SFI SYSTEM (1MZ–FE)
ON–VEHICLE INSPECTION
1.
INSPECTION THROTTLE BODY
(a)
Inspect the throttle control motor for operating sound.
(1)
Turn the ignition switch ON.
(2)
When turning the accelerator pedal position sensor lever, check the running sound of the motor.
Also, check that there is no friction sound.
(b)
Inspect the throttle position sensor.
(1)
Connect the hand–held tester or OBD II scan tool to the DLC3.
(2)
Turn the ignition switch ON.
(3)
Check that the check engine warning light does not light up.
(4)
Check that the throttle valve opening percentage (THROTTLE POS) of the CURRENT DATA
shown the standard value.
Standard throttle valve opening percentage: 60 % or more
2.
INSPECT ACCELERATOR PEDAL POSITION SENSOR
(a)
When turning ignition switch ON, check that the voltage of the throttle position sensor of the CURRENT
DATA shown the standard value.
Standard voltage: 0.6 – 1.0 V
2002 CAMRY REPAIR MANUAL (RM881U)
ENGINE CONTROL SYSTEM
–
SFI SYSTEM (1MZ–FE)
Author :
10–7
10064–01
Date :
1437
Advertisement
Table of Contents
