Table of Contents
Advertisement
14–132
P12418
Front Mark
Front Mark
Upward
No. 1
No. 2
No. 1 and
Expander
Front
Side Rail Upper
2002 CAMRY REPAIR MANUAL (RM881U)
ENGINE MECHANICAL
30.
(a)
(b)
A32958
(c)
(d)
A13497
31.
(a)
(b)
NOTICE:
Install the compression ring No. 2 with the code mark (2N)
facing upward.
Painted Mark
Code Mark (2N)
A52526
(c)
Side Rail Lower
No. 2
Compression
A52527
–
CYLINDER BLOCK (2AZ–FE)
INSTALL PISTON
Using a small screwdriver, install a new snap ring at one
end of the piston pin hole.
Gradually hat the piston to 80 – 90_C (176 – 194_F).
Align the front marks on the piston with connecting rod,
and push in the piston with your thumb.
Using a small screwdriver, install a new snap ring on the
other end of the piston pin hole.
INSTALL PISTON RING SET
Install the oil ring expander and 2 side rails by hand.
Using a piston ring expander, install the 2 compression
rings with the point mark facing right side.
Position the piston rings so that the ring ends are as
shown.
Author :
Date :
1656
Advertisement
Table of Contents
