Table of Contents
Advertisement
AUTOMATIC TRANSMISSION / TRANS
2002 CAMRY REPAIR MANUAL (RM881U)
–
TRANSMISSION WIRE
6.
INSTALL TRANSMISSION WIRE
(a)
Coat a O–ring of the transmission wire connector with
ATF.
(b)
Install the transmission wire.
D03636
(c)
Install the bolt.
Torque: 5.4 N m (55 kgf cm, 48 in. lbf)
C50009
7.
CONNECT TRANSMISSION WIRE
(a)
Coat a O–ring of the ATF temperature sensor with ATF.
(b)
Install the ATF temperature sensor with the lock plate and
bolt.
Torque: 6.6 N m (67 kgf cm, 58 in. lbf)
(c)
Connect the 5 shift solenoid valve connectors.
D25591
8.
INSTALL AUTOMATIC TRANSAXLE OIL PAN
SUB–ASSY
(a)
Install the 2 magnets in the oil pan.
(b)
Apply seal packing or equivalent to 18 bolts.
Seal packing:
THREE BOND 2430 or equivalent
D25674
(c)
Install a new gasket, oil pan and 18 bolts to the transaxle
case.
Torque: 7.8 N m (80 kgf cm, 69 in. lbf)
NOTICE:
Because the bolts should be seal bolts, apply seal packing
to bolts and tighten them within 10 minutes after applica-
tion.
C83111
Author :
Date :
40–27
2102
Advertisement
Table of Contents
