Toyota 2002 Camry Service Manual page 449

2002 CAMRY REPAIR MANUAL (RM881U)
STARTING & CHARGING –
15. INSTALL GENERATOR BRUSH HOLDER ASSY
Upward
(a) Install the 2 screws and brush holder.
Torque: 2.0 N m (20 kgf cm, 18 in. lbf)
NOTICE:
Be careful of the holder installation direction.
A51919
(b) Install the brush cover.
(c) Install the end cover and plate terminal with the bolt and
3 nuts.
Torque:
Nut 4.4 N m (45 kgf cm, 39 in. lbf)
Bolt 3.9 N m (39 kgf cm, 35 in. lbf)
(d) Install the terminal insulator with the nut.
Torque: 4.1 N m (42 kgf cm, 36 in. lbf)
16. INSTALL GENERATOR PULLEY
SST
HINT:
SST1 – A, B
SST2
(a) Install the pulley to the rotor shaft by tightening the pulley
nut by hand.
(b) Hold SST 1 – A with a torque wrench, and tighten SST 1
– B clockwise to the specified to torque.
Torque: 39 N m (400 kgf cm, 29 ft lbf)
NOTICE:
Check that SST is secured to the pulley shaft.
A38024
(c) Mount SST 2 in a vise.
(d) Insert SST 1 – A, B into SST 2, and attach the pulley nut
to SST 2.
A38025
GENERATOR ASSY (1MZ–FE)
09820–63010 (09820–06010, 09820–06020)
Author :
09820–06010
09820–06020
Date :
19–39
1911