Table of Contents
Advertisement
32–10
OVERHAUL
HINT:
COMPONENTS: See page
1.
REMOVE INSTRUMENT PANEL REINFORCEMENT
(See page 71–12)
2.
REMOVE BRAKE PEDAL RETURN SPRING
3.
REMOVE PUSH ROD PIN
(a)
Remove the clip and push rod pin.
4.
REMOVE BRAKE PEDAL SUPPORT ASSY
(a)
Disconnect the stop lamp switch connector.
(b)
Remove the bolt, 4 nuts and brake pedal support assy.
5.
REMOVE STOP LAMP SWITCH ASSY
(a)
Loosen the lock nut and remove the stop lamp switch.
6.
REMOVE BRAKE PEDAL SUB–ASSY (NORMAL TYPE BRAKE PEDAL)
(a)
Remove the nut, bolt and brake pedal sub–assy from brake pedal support sub–assy.
7.
REMOVE BRAKE PEDAL PAD
8.
REMOVE BRAKE PEDAL BUSH (NORMAL TYPE BRAKE PEDAL)
(a)
Remove the 2 brake pedal bushes from brake pedal.
9.
REMOVE STOP LAMP SWITCH CUSHION
10.
INSTALL STOP LAMP SWITCH CUSHION
11.
INSTALL BRAKE PEDAL BUSH (NORMAL TYPE BRAKE PEDAL)
(a)
Install the new 2 brake pedal bushes to brake pedal.
HINT:
Apply the lithium soap base glycol grease to the parts indicates by arrows (See page 32–8).
12.
INSTALL BRAKE PEDAL PAD
13.
INSTALL BRAKE PEDAL SUB–ASSY (NORMAL TYPE BRAKE PEDAL)
(a)
Install the brake pedal sub–assy with the bolt and nut.
Torque: 37 N m (375 kgf cm, 27 ft lbf)
14.
INSTALL STOP LAMP SWITCH ASSY
(a)
Install the stop lamp switch with the lock nut.
Torque: 26 N m (265 kgf cm, 19 ft lbf)
15.
INSTALL BRAKE PEDAL SUPPORT ASSY
(a)
Install the brake pedal support assy with the bolt and 4 nuts.
Torque:
Bolt: 20 N m (204 kgf cm, 15 ft lbf)
Nut: 13 N m (130 kgf cm, 9 ft lbf)
2002 CAMRY REPAIR MANUAL (RM881U)
BRAKE
32–8
and
71–7
–
BRAKE PEDAL SUPPORT ASSY
Author :
320CZ–01
Date :
1998
Advertisement
Table of Contents
