Toyota 2002 Camry Service Manual page 471

21. INSTALL STEERING GEAR OUTLET RETURN TUBE
(See page 51–29)
SST 09023–00100
22. INSTALL TIE ROD ASSY LH
(See page 30–8)
23. INSTALL TIE ROD ASSY RH
HINT:
Install the RH side by the same procedures with the LH side.
25. INSTALL FRONT STABILIZER BRACKET NO.1 RH
HINT:
Install the RH side by the same procedures with the LH side.
26. INSTALL FRONT SUSPENSION MEMBER DYNAMIC DAMPER(EXCEPT 1MZ–FE ENGINE TYPE)
(a) Install the front suspension member dynamic damper with 2 bolts to the front frame assy.
Torque: 29 N m (296 kgf cm, 21 ft lbf)
28. INSTALL FRONT STABILIZER LINK ASSY RH
HINT:
Install the RH side by the same procedures with the LH side.
29. INSTALL FRONT WHEEL
Torque: 103 N m (1,050 kgf cm, 76 ft lbf)
30. BLEED POWER STEERING FLUID(See page 51–3)
31. CHECK POWERSTEERING FLUID LEAKAGE
32. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT(See page 26–5)
2002 CAMRY REPAIR MANUAL (RM881U)
FRONT SUSPENSION –
24. INSTALL FRONT STABILIZER BRACKET NO.1 LH
(a) Install the 2 front stabilizer brackets No. 1 LH with the 2
bolts.
Torque: 19 N m (194 kgf cm, 14 ft lbf)
C91607
27. INSTALL FRONT STABILIZER LINK ASSY LH
(a) Install the front stabilizer link assy LH with the 2 nuts.
Torque: 74 N m (755 kgf cm, 55 ft lbf)
HINT:
If the ball joint turns together with the nut, use a hexagon (6 mm)
wrench to hold the stud.
F40143
STABILIZER BAR FRONT
Author :
26–21
Date :
1933