Table of Contents
Advertisement
19–6
3.
REMOVE STARTER ARMATURE ASSY
(a)
Remove the starter armature assy from starter yoke assy.
Continuity
No Continuity
2002 CAMRY REPAIR MANUAL (RM881U)
STARTING & CHARGING
–
4.
INSPECT STARTER ARMATURE ASSY
(a)
Check the commutator for open circuit.
(1)
If there is no continuity between any segments, replace the ar-
mature.
A58372
(b)
Check the commutator for ground.
(1)
If there is continuity, replace the armature.
A58373
(c)
Check the commutator for dirty and burn on surface.
If the surface is dirty or burnt, correct it with sandpaper (No.400)
or a lathe.
(d)
Check for the commutator circuit runout.
(1)
(2)
Standard circle runout: 0.02 mm (0.0008 in.)
Maximum circle runout: 0.05 mm (0.0020 in.)
If the circle runout is greater than maximum, replace the arma-
A58371
ture.
(e)
Using vernier calipers, measure the commutator length.
Standard length: 3.3 mm (0.130 in.)
Maximum length: 4.0 mm (0.158 in.)
If the length is greater than maximum, replace the armature.
Length
A58584
STARTER ASSY (2AZ–FE)
Using an ohmmeter, check that there is continuity
between the segments of the commutator.
Using an ohmmeter, check that there is no continu-
ity between the commutator and armature coil core.
Place the commutator on V–blocks.
Using a dial indicator, measure the circle runout.
Author :
Date :
1878
Advertisement
Table of Contents
