26–12
Outside
2002 CAMRY REPAIR MANUAL (RM881U)
FRONT SUSPENSION
(h)
Install the front suspension support sub–assy LH with the
Outside
mark facing to the outside of the vehicle.
(i)
Temporarily tighten the new lock nut.
8.
INSTALL FRONT SHOCK ABSORBER WITH COIL
SPRING
(a)
Install the front shock absorber with coil spring as shown
in the illustration.
F40169
(b)
Install the 3 nuts to the upper side of front shock absorber
with coil spring.
Torque: 80 N m (816 kgf cm, 59 ft lbf)
NOTICE:
Be careful not to drop the 2 washers in the case that there
is front suspension upper brace center.
F40140
(c)
Install the 2 bolts and 2 nuts to the lower side of front
shock absorber with coil spring.
Torque: 210 N m (2,141 kgf cm, 155 ft lbf)
NOTICE:
When installing bolt, stop the bolt from rotating and torque
the nut.
C93871
(d)
Fully tighten the lock nut.
Torque: 49 N m (500 kgf cm, 36 ft lbf)
F40137
(e)
w/ ABS:
Install the front flexible hose No. 1 and speed sensor front
LH with the bolt.
Torque: 18.8 N m (192 kgf cm, 14 ft lbf)
(f)
w/o ABS:
Install the front flexible hose No. 1 with the bolt.
Torque: 18.8 N m (192 kgf cm, 14 ft lbf)
C65925
–
FRONT SHOCK ABSORBER WITH COIL SPRING
Author :
Date :
1924