Table of Contents
Advertisement
32–52
REPLACEMENT
1.
DRAIN BRAKE FLUID
NOTICE:
Wash off the brake fluied immediately if it comes into contact with a painted surface.
From M/C 2nd
To FL W/C
To RR W/C To RL W/C
3.
REMOVE ABS & TRACTION ACTUATOR ASSY
(a)
Remove the 2 nuts and ABS & TRACTION actuator from the bracket.
(b)
Remove the 2 holders and 3 cushions from the actuator.
4.
INSTALL ABS & TRACTION ACTUATOR ASSY
(a)
Install the 3 cushions and 2 holders to the ABS & TRACTION actuator.
(b)
Install the actuator to the bracket with the 2 nuts.
Torque: 5.4 N m (55 kgf cm, 48 in. lbf)
2002 CAMRY REPAIR MANUAL (RM881U)
BRAKE
2.
(a)
(b)
(c)
F40999
(d)
From M/C 1st
(e)
(f)
To FR W/C
C86250
–
ABS & TRACTION ACTUATOR ASSY (w/ VSC)
REMOVE ABS & TRACTION ACTUATOR ASSY WITH
BRACKET
Slide the clip and disconnect the actuator No. 1 hose from
the actuator.
Disconnect the master cylinder pressure sensor connec-
tor and harness clamp.
Using SST, disconnect the 6 brake lines from the actuator.
SST
09023–00100
Use tags or make a memo to identify the place to recon-
nect.
Disconnect the actuator connector.
Remove the 3 nuts and brake actuator with bracket.
Author :
320CR–01
Date :
2040
Advertisement
Table of Contents
