Table of Contents
Advertisement
13.
INSTALL MASTER CYLINDER RESERVOIR GROMMET
(a)
Apply the lithium soap base glycol grease on the 2 master cylinder reservoir grommets.
(b)
Install the 2 master cylinder reservoir grommets to the master cylinder reservoir sub–assy.
14.
INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB–ASSY
(a)
Install the master cylinder reservoir sub–assy to the master cylinder with the screw.
15.
INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER
(a)
Install the brake master cylinder reservoir strainer.
16.
INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSY
(a)
Install the brake master cylinder reservoir filler cap assy.
2002 CAMRY REPAIR MANUAL (RM881U)
BRAKE
–
BRAKE MASTER CYLINDER SUB–ASSY
12.
INSTALL BRAKE MASTER CYLINDER KIT(W/ VSC)
(a)
Place master cylinder in vise.
(b)
Apply the lithium soap base glycol grease on new No.1
and No.2 piston sub–assy.
(c)
Install the No.2 and No.1 piston sub–assy.
NOTICE:
z
If the piston is inserted at an angle, there is a possibil-
ity that the cylinder bore could be damaged.
z
Be careful not to damage the rubber lips on the pis-
tons.
(d)
Install the straight pin.
HINT:
Insert the No.2 piston with the groove positioning horizontally.
F09718
(e)
Push in the piston and install the snap ring with snap ring
pliers.
(f)
Apply the lithium soap base glycol grease on a new O–
ring and install the O–ring to the master cylinder.
F41707
Author :
Date :
32–15
2003
Advertisement
Table of Contents
