Table of Contents
Advertisement
REPLACEMENT
1.
WORK FOR PREVENTING GASOLINE FROM SPILLING OUT(See page 11–1)
2.
REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE
3.
REMOVE ENGINE COVER SUB–ASSY NO.1
4.
DISCONNECT FUEL TUBE SUB–ASSY
(See page 11–1)
6.
REMOVE FUEL INJECTOR ASSY
(a)
Pull out 4 injector from the delivery pipe.
Insulator
Push
Turn
Connector
2002 CAMRY REPAIR MANUAL (RM881U)
FUEL
5.
NOTICE:
Be careful not to drop the injectors when removing the de-
livery pipe.
(a)
(b)
(c)
(d)
(e)
A52073
7.
(a)
(b)
O–Ring
A50145
(c)
(d)
NOTICE:
S
S
B09635
(e)
–
FUEL INJECTOR ASSY (2AZ–FE)
REMOVE FUEL DELIVERY PIPE W/INJECTOR
Remove the ventilation hose No. 2.
Disconnect 4 injector connecters from the injector.
Remove 2 clamp and wire harness from the delivery pipe.
Remove 2 bolts and delivery pipe together with 4 injector.
Remove 2 spacers from the cylinder head.
INSTALL FUEL INJECTOR ASSY
Install the new insulator to each injector.
Apply a light coat of spindle oil or gasoline to new O–ring
and install them to each injector.
Apply a light coat of spindle oil or gasoline on the place
where a delivery pipe touches on O–ring.
While turning the injector clockwise and counterclock-
wise, push it to the delivery pipes. install 4 injectors.
Be careful not to twist the O–ring.
After installing injectors, check that they turns smoo-
thy. If an injector dose not, reinsiall it with a new O–
ring.
Position the injector connector downward.
Author :
11–11
11021–02
Date :
1455
Advertisement
Table of Contents
