Table of Contents
Advertisement
AUTOMATIC TRANSMISSION / TRANS
ADJUSTMENT
With the brake pedal depressed,
shift while holding the shift lever
knob button in. (The ignition
switch must be in ON position.)
Shift while holding the shift
lever knob button in.
Shift normally
2002 CAMRY REPAIR MANUAL (RM881U)
–
FLOOR SHIFT ASSY
1.
INSPECT SHIFT LEVER POSITION
(a)
When shifting the shift lever to each position, make sure
that it moves smoothly, and the position indicator displays
correctly.
Positions which can be shifted without pressing the
shift lever knob button
R
N
Positions which can be operated only while pressing
the shift lever knob button
D
2
Positions which can be operated only while pressing
the shift lever knob button, ignition switch ON and
brake pedal depressed
P
R
(b)
Start the engine and make sure that the vehicle moves
forward when shifting the lever from N to D position, and
moves rearward when shifting to R position.
F00693
2.
ADJUST SHIFT LEVER POSITION
(a)
Loosen the nut on the control shaft lever.
D25118
(b)
Push the control shaft fully downward.
(c)
Return the control shaft lever 2 notches to N position.
(d)
Set the shift lever to N position.
(e)
While holding the shift lever lightly toward the R position
side, tighten the shift lever nut.
Torque: 14.7 N·m (150 kgf·cm, 10 ft·lbf)
(f)
Start the engine and make sure that the vehicle moves
forward when shifting the lever from N to D position and
moves rearward when shifting it to R position.
D25119
D, L
2
D
N
L, N
R
P
Author :
40–47
40069–02
Date :
2122
Advertisement
Table of Contents
