Table of Contents
Advertisement
Raise
Push
Hook
Pin
Disconnect
Hook
Pin
Plunger
Push
2002 CAMRY REPAIR MANUAL (RM881U)
ENGINE MECHANICAL
17.
(a)
A52461
(b)
NOTICE:
When installing the tensioner, set the hook again if the
hook releases the plunger.
Engine
Front
A52462
(c)
Turn
A52463
(d)
Turn
A52464
–
CAMSHAFT (2AZ–FE)
INSTALL CHAIN TENSIONER ASSY NO.1
Release the ratchet pawl, fully push in the plunger and ap-
ply the hook to the pin so that the plunger cannot spring
out.
Install a new gasket and chain tensioner with the 2 nuts.
Torque: 9.0 N m (92 kgf cm, 80 in. lbf)
Turn the crankshaft counterclockwise, and disconnect
the plunger knock pin from the hook.
Turn the crankshaft clockwise, and check that the slipper
is pushed by the plunger.
Author :
14–93
Date :
1617
Advertisement
Table of Contents
