Table of Contents
Advertisement
13.
INSTALL PARKING BRAKE SHOE STRUT LH
14.
INSTALL PARKING BRAKE SHOE STRUT COMPRESSION SPRING
2002 CAMRY REPAIR MANUAL (RM881U)
PARKING BRAKE
-
PARKING BRAKE ASSY
12.
INSTALL PARKING BRAKE SHOE
(a)
Install the shoe lever and shim to the rear shoe with a new
C-washer .
(b)
Using a feeler gauge, measure the clearance.
Standard clearance: Less than 0.35 mm (0.0138 in.)
If the clearance is not within the specification, replace the shim
with one of the correct size.
Shim Thickness
0.3 mm (0.012 in.)
0.6 mm (0.024 in.)
R00343
(c)
Apply the high temperature grease to the adjusting bolt.
(d)
Install the shoe adjusting screw set and tension spring to
the front and rear shoe.
(e)
Install the 2 pins, 4 cups and 2 shoe hold-down springs.
(f)
Connect the parking brake cable to the shoe lever.
(g)
Install the front and rear parking brake shoe.
F41705
15.
INSTALL PARKING BRAKE SHOE RETURN TENSION
SPRING
(a)
Using a needle nose pliers, install the 2 return tension
springs.
F40318
Author :
Date :
33-23
Shim Thickness
0.9 mm (0.035 in.)
-
2074
Advertisement
Table of Contents
