PARKING BRAKE LEVER SUB–ASSY
REPLACEMENT
HINT:
COMPONENTS: See page
1.
REMOVE CONSOLE PANEL UPPER
(See page 71–12)
2.
REMOVE AIR DUCT REAR NO.1
(See page 71–12)
4.
REMOVE PARKING BRAKE SWITCH ASSY
(a)
Remove the screw and parking brake switch assy.
5.
INSTALL PARKING BRAKE SWITCH ASSY
(a)
Install the parking brake switch assy with the screw.
7.
INSTALL AIR DUCT REAR NO.1
(See page 71–12)
8.
INSTALL CONSOLE PANEL UPPER
(See page 71–12)
9.
CHECK PARKING BRAKE LEVER TRAVEL(See page 33–2)
PARKING BRAKE
71–7
and
33–3
3.
(a)
(b)
(c)
(d)
F41001
6.
(a)
(b)
(c)
F41001
–
PARKING BRAKE LEVER SUB–ASSY
REMOVE PARKING BRAKE LEVER SUB–ASSY
Disconnect the parking brake switch connector.
Remove the lock nut and adjusting nut.
Remove the 2 bolts.
Using a screwdriver, disconnect the parking brake cable
No. 1 and remove the parking brake lever sub–assy.
INSTALL PARKING BRAKE LEVER SUB–ASSY
Connect the parking brake cable to the lever and install
the adjusting nut and lock nut.
Install the paking brake lever sub–assy with the 2 bolts.
Torque: 23 N m (235 kgf cm, 17 ft lbf)
Connect the parking brake switch connector.
Author :
33–7
3304U–01
Date :
2058