Table of Contents
Advertisement
11–24
Valve
21.
REMOVE FUEL MAIN TUBE SUPPORT
22.
REMOVE FUEL TANK CUSHION NO.1
23.
REMOVE FUEL TANK CUSHION NO.2
26.
INSTALL FUEL MAIN TUBE SUPPORT
Torque: 5.4 N m (55 kgf cm, 48 in. lbf)
2002 CAMRY REPAIR MANUAL (RM881U)
FUEL
20.
(a)
(b)
NOTICE:
Gasket
S
A60493
S
24.
(a)
25.
(a)
A60495
27.
(a)
(b)
Apply light oil
around the valve
(c)
A60494
–
FUEL TANK ASSY (2AZ–FE)
REMOVE FUEL CUT OFF W/TUBE VALVE ASSY
Using a screwdriver, unlock the claw and remove the pro-
tector by turning it counter clockwise.
Insert a clip remover between the cut off valve and the
gasket, remove the cut off valve by gradually pushing it
upward.
Work accurately to maintain the sealing performance
of the cut off valve, since it is made from resin. It is
easy to damage by removing and installing forcibly.
Be sure to install new cut off valve and gasket.
INSTALL FUEL TANK CUSHION NO.1
Install new fuel tank cushions as shown in the illustration.
INSTALL FUEL TANK CUSHION NO.2
Install new fuel tank cushion as shown in the illustration.
INSTALL FUEL CUT OFF W/TUBE VALVE ASSY
Install a new gasket to the fuel tank.
Apply light oil around the new fuel cut off valve as shown
in the illustration, and insert it into the tank without force.
Be careful not to drop the gasket into the tank.
Check that the fuel cut off valve is fully inserted.
Author :
Date :
1468
Advertisement
Table of Contents
