Table of Contents
Advertisement
29.
INSTALL FUEL TANK ASSY
(a)
Set the mission jack to the fuel tank.
(b)
Install the fuel tank with the fuel tank bands.
Torque: 39 N m (400 kgf cm, 29 ft lbf)
31.
INSTALL FUEL TANK PROTECTOR LOWER CENTER
(a)
Install the protector with the 4 bolts.
Torque: 5.4 N m (55 kgf cm, 48 in. lbf)
32.
INSTALL PARKING BRAKE CABLE ASSY NO.3
Torque: 5.4 N m (55 kgf cm, 48 in. lbf)
33.
INSTALL PARKING BRAKE CABLE ASSY NO.2
Torque: 5.4 N m (55 kgf cm, 48 in. lbf)
34.
INSTALL EXHAUST PIPE ASSY CENTER
(See page 15–2)
35.
INSTALL FLOOR PANEL BRACE REAR
(See page 15–2)
36.
INSTALL FUEL SUCTION TUBE ASSY W/ PUMP & GAGE (See page 11–15)
37.
INSTALL FUEL TANK VENT TUBE SET PLATE
(See page 11–15)
38.
INSTALL FUEL PUMP TUBE SUB–ASSY
(See page 11–15)
39.
INSTALL REAR FLOOR SERVICE HOLE COVER
(See page 11–15)
40.
INSPECT FUEL LEAK
41.
CHECK EXHAUST LEAKAGE
2002 CAMRY REPAIR MANUAL (RM881U)
FUEL
28.
(a)
Apply light oil
(b)
around the valve
(c)
A60496
30.
(a)
NOTICE:
S
S
A57340
–
FUEL TANK ASSY (2AZ–FE)
INSTALL FUEL TANK OVER FILL CHECK VALVE
ASSY
Install a new gasket to the fuel tank.
Apply light oil around the new check valve as shown in the
illustration, and insert it into the tank without force. Be
careful not to drop the gasket into the tank.
Check that the check valve is fully inserted.
INSTALL FUEL PUMP TUBE SUB–ASSY
Push in the fuel tube connector to the fuel pipe until con-
nector makes a "click" sound.
Check if there is any damage or foreign objects on the
connected part of the pipe.
After connecting, check if the pipe and the connector
are securely connected by pulling them.
Author :
11–25
Date :
1469
Advertisement
Table of Contents
