Table of Contents
Advertisement
No Continuity
Terminal C
Terminal 50
Terminal 50
2002 CAMRY REPAIR MANUAL (RM881U)
STARTING & CHARGING
5.
(a)
Length
If the length is less than minimum, replace the starter commuta-
tor end frame assy.
A56443
(b)
If the there is continuity repair or replace the starter commutator
end frame assy.
A58583
6.
(a)
If necessary, replace the repair service starter kit.
A58586
(b)
If there is no continuity, replace the repair service starter kit.
Continuity
A58375
(c)
If there is no continuity, replace the repair service kit.
Continuity
A58376
–
STARTER ASSY (1MZ–FE)
INSPECT STARTER COMMUTATOR END FRAME
ASSY
Using vernier calipers, measure the brush holder length.
Standard length: 9.0 mm (0.354 in.)
Maximum length: 4.0 mm (0.158 in.)
Check the brush holder.
(1)
Using an ohmmeter, check that there is no continu-
ity between the positive (+) and negative (–) brush
holders.
INSPECT REPAIR SERVICE STARTER KIT
Check the plunger.
(1)
Push in the plunger and check that it returns quickly
to its original position.
Check the pull–in coil for open circuit.
(1)
Using an ohmmeter, check that there is continuity
between terminals 50 and C.
Check whether the hold–in coil has an open circuit.
(1)
Using an ohmmeter, check that there is continuity
between terminal 50 and the switch body.
Author :
19–27
Date :
1899
Advertisement
Table of Contents
