Table of Contents
Advertisement
26–10
SST
5.
REMOVE SHOCK ABSORBER ASSY FRONT LH
(a)
Using SST, compress the front coil spring LH.
SST
09727–30021
NOTICE:
Do not use an impact wrench. It will damage the SST.
HINT:
Use 2 of the same type of SST.
(b)
Remove the front suspension support sub–assy LH, front suspension support bearing LH, front coil
spring seat upper LH, front coil spring insulator upper LH, front coil spring LH, front spring bumper LH
and front coil spring insulator upper LH.
2002 CAMRY REPAIR MANUAL (RM881U)
FRONT SUSPENSION
–
(e)
Remove the 3 nuts on the upper side of the front shock
absorber with coil spring.
(f)
Remove the front shock absorber with the coil spring.
NOTICE:
Be careful not to drop the 2 washers in the case that there
is front suspension upper brace center.
F40140
4.
FIX FRONT SHOCK ABSORBER WITH COIL SPRING
(a)
Install 2 nuts and a bolt to the bracket at the lower side of
SST
the front shock absorber with coil spring and secure it in
a vise.
F03956
6.
INSPECT SHOCK ABSORBER ASSY FRONT LH
(a)
Compress and extend the shock absorber rod and check
that there is no abnormal resistance or unusual sound
during operation.
If there is any abnormality, replace the shock absorber assy
front LH with a new one.
NOTICE:
When disposing of the shock absorber assy front LH, see
W03646
DISPOSAL on page 26–14.
7.
INSTALL SHOCK ABSORBER ASSY FRONT LH
(a)
Install the front coil spring insulator lower LH onto the
shock absorber assy front LH.
(b)
Install the front spring bumper LH to the piston rod.
FRONT SHOCK ABSORBER WITH COIL SPRING
Author :
Date :
1922
Advertisement
Table of Contents
