Table of Contents
Advertisement
OIL FILTER SUB–ASSY (2AZ–FE)
REPLACEMENT
CAUTION:
S
Prolonged and repeated contact with mineral oil will result in the removal of natural fats from
the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains po-
tentially harmful contaminants which may cause skin cancer.
S
Exercise caution in order to minimize the length and frequency of contact of your skin to used
oil. Wear protective clothing and gloves. Wash your skin thoroughly with soap and water, or use
water–less hand cleaner to remove any used engine oil. Do not use gasoline, thinners, or sol-
vents.
S
In order to preserve the environment, used oil and used oil filter must be disposed of only at
designated disposal sites.
1.
DRAIN ENGINE OIL
(a)
Remove the oil filler cap.
(b)
Remove the oil drain plug, and drain the oil into a container.
4.
ADD ENGINE OIL
(a)
Clean and install the oil drain plug with a new gasket.
Torque: 25 N m (255 kgf cm, 18 ft lbf)
(b)
Fill with fresh engine oil.
Capacity:
Drain and refill w/ Oil filter change 3.8 liters (4.0 US qts, 3.3 lmp. qts)
Drain and refill w/o Oil filter change 3.6 liters (3.8 US qts, 3.2 lmp. qts)
Dry fill 4.5 liters (4.8 US qts, 4.0 lmp. qts)
(c)
Install the oil filler cap.
5.
INSPECT OIL LEAK
2002 CAMRY REPAIR MANUAL (RM881U)
LUBRICATION
2.
REMOVE OIL FILTER SUB–ASSY
(a)
Using SST, remove the oil filter.
SST
3.
INSTALL OIL FILTER SUB–ASSY
SST
(a)
Check and clean the oil filter installation surface.
(b)
Apply clean engine oil to the gasket of a new oil filter.
B11412
(c)
Lightly screw the oil filter into place, and tighten it until the
gasket contacts the seat.
(d)
Using SST, tighten it an additional 3/4 turn.
SST
SST
B11413
–
OIL FILTER SUB–ASSY (2AZ–FE)
09228–06501
09228–06501
Author :
17–7
1701X–02
Date :
1853
Advertisement
Table of Contents
