Table of Contents
Advertisement
New O–ring
Delivery Pipe
Grommet
Injector
Delivery Pipe
Insulator
Fuel Pipe
Clamp No.1
A
2002 CAMRY REPAIR MANUAL (RM881U)
FUEL
B00347
(b)
CORRECT
WRONG
FI6372
(c)
O–ring
Grommet
Spacer
A62371
(d)
A60083
A
B12941
–
FUEL SYSTEM (1MZ–FE)
(5)
Put a container under the connection.
Observe these precautions when removing and installing
the injector.
(1)
Never reuse the O–ring.
(2)
When placing the new O–rings on the injector, take
care not to damage it in any way.
(3)
Coat a new O–rings with spindle oil or gasoline be-
fore installing. Never use engine, gear or brake oil.
Install the injector to the delivery pipe and intake manifold,
as shown in the illustration. Before installing the injector,
be sure to apply spindle oil or gasoline on the place where
a delivery pipe or an intake manifold touches an O–ring
of the injector.
Observe these precautions when disconnecting the fuel
tube connector.
(1)
Remove the fuel pipe clamp No.1.
(2)
Check if there is any dirt like mud on the pipe and
around the connector before disconnecting them
and clean the dirt away.
(3)
Disconnect the connector from the hose while
pinching part A with fingers as shown in the illustra-
tion.
Author :
11–27
Date :
1471
Advertisement
Table of Contents
