Table of Contents
Advertisement
15.
REMOVE PISTON SEAL
(a)
Using a screwdriver, remove the piston seal from the disc brake cylinder.
NOTICE:
Do not damage the inner cylinder and the cylinder groove.
16.
REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP
17.
REMOVE FRONT DISC BRAKE BLEEDER PLUG
18.
INSPECT BRAKE CYLINDER AND PISTON
(a)
Check the cylinder bore and piston for rust or scoring.
20.
INSPECT FRONT DISC BRAKE PAD SUPPORT PLATE
(a)
Make sure that they have sufficient rebound, no deformation cracks or wear, and have had all rust and
dirt cleaned off.
21.
INSPECT FRONT DISC BRAKE PAD SUPPORT PLATE
(a)
Make sure that they have sufficient rebound, no deformation cracks or wear, and have had all rust and
dirt cleaned off.
2002 CAMRY REPAIR MANUAL (RM881U)
BRAKE
–
FRONT BRAKE
14.
REMOVE FRONT DISC BRAKE PISTON
(a)
Place a piece of cloth or similar, between the piston and
the disc brake cylinder.
(b)
Use compressed air to remove the piston from the disc
brake cylinder.
CAUTION:
Do not place your fingers in front of the piston when using
compressed air.
C64095
NOTICE:
Do not spatter the brake fluid.
19.
INSPECT PAD LINING THICKNESS
(a)
Using a ruler, measure the pad lining thickness.
Standard thickness: 12.0 mm (0.472 in.)
Minimum thickness: 1.0 mm (0.039 in.)
R02951
Author :
Date :
32–27
2015
Advertisement
Table of Contents
