27–8
18.
INSTALL REAR SEAT 3 POINT TYPE BELT ASSY OUTER
(a)
TMC made: (See page 61–14)
(b)
TMMK made: (See page 61–17)
19.
INSTALL REAR SIDE SEAT BACK ASSY RH
(a)
TMC made: (See page 72–34)
(b)
TMMK made: (See page 72–38)
20.
INSTALL REAR SIDE SEAT BACK ASSY LH
HINT:
Install the LH side by the same procedures with the RH side.
21.
INSTALL REAR WHEEL
Torque: 103 N m (1,050 kgf cm, 76 ft lbf)
22.
INSPECT REAR WHEEL ALIGNMENT(See page 27–3)
2002 CAMRY REPAIR MANUAL (RM881U)
REAR SUSPENSION
–
SHOCK ABSORBER ASSY REAR LH
(d)
Tighten the nut in the center of suspension support.
Torque: 49 N m (500 kgf cm, 36 ft lbf)
HINT:
If the shock absorber has not been disassembled, it is neces-
sary to torque the nut.
(e)
Install the rear suspension support No. 1cover LH.
C92182
17.
INSTALL REAR STABILIZER LINK ASSY LH
(a)
Install the stabilizer bar link to the shock absorber with the
nut.
Torque: 39 N m (400 kgf cm, 29 ft lbf)
HINT:
If the ball joint turns together with the nut, use a hexagon (5 mm)
wrench to hold the stud.
C66631
Author :
Date :
1941