Table of Contents
Advertisement
27–12
C
B
A
14.
TEMPORARY TIGHTEN REAR SUSPENSION ARM ASSY NO.1 RH
HINT:
Temporarily tighten the RH side by the procedures with the LH side.
16.
TEMPORARY TIGHTEN REAR SUSPENSION ARM ASSY NO.2 RH
HINT:
Temporarily tighten the RH side by the procedures with the LH side.
17.
TEMPORARY TIGHTEN STRUT ROD ASSY REAR
(See page 27–19)
2002 CAMRY REPAIR MANUAL (RM881U)
REAR SUSPENSION
12.
INSTALL REAR SUSPENSION MEMBER SUB–ASSY
C
(a)
Support the rear suspension member with a jack.
(b)
Install the rear suspension member with the 4 nuts, 2 bolts
B
and 4 retainers.
Torque:
A
A, B: 55 N m (561 kgf cm, 41 ft lbf)
C: 38 N m (387 kgf cm, 28 ft lbf)
B53742
13.
TEMPORARY TIGHTEN REAR SUSPENSION ARM
ASSY NO.1 LH
(a)
Connect the rear suspension arm No. 1 (outer side) to the
rear axle carrier with the bolt and nut, and temporarily
tighten the bolt and nut.
HINT:
Insert the bolt from the front side of the vehicle and temporarily
install the bolt.
B53736
15.
TEMPORARY TIGHTEN REAR SUSPENSION ARM
ASSY NO.2 LH
(a)
Connect the rear suspension arm No. 2 (outer side) to the
rear axle carrier with the bolt and nut, and temporarily
tighten the bolt.
HINT:
Insert the bolt from the rear side of the vehicle and temporarily
install the bolt.
B53735
–
REAR SUSPENSION ARM ASSY NO.1 LH
Author :
Date :
1945
Advertisement
Table of Contents
