Table of Contents
Advertisement
42–12
CLUTCH RELEASE CYLINDER ASSY
OVERHAUL
SST
2.
REMOVE CLUTCH RELEASE CYLINDER ASSY
(a)
Remove the 2 bolts and clutch release cylinder assy.
3.
REMOVE CLUTCH RELEASE CYLINDER KIT
(a)
Remove the boot from the cylinder body.
(b)
Remove the push rod from the cylinder body.
(c)
Remove the piston from the cylinder body.
NOTICE:
Be careful not to damage the inside of the cylinder body.
(d)
Remove the spring from the cylinder body.
(e)
Remove the bleeder plug cap from the bleeder plug.
4.
REMOVE RELEASE CYLINDER BLEEDER PLUG
5.
INSTALL RELEASE CYLINDER BLEEDER PLUG
Torque: 8.3 N m (85 kgf cm, 73 in. lbf)
2002 CAMRY REPAIR MANUAL (RM881U)
CLUTCH
–
CLUTCH RELEASE CYLINDER ASSY
1.
DISCONNECT CLUTCH RELEASE CYLINDER TO
FLEXIBLE HOSE TUBE
(a)
Using SST, disconnect the flexible hose tube.
SST
09023–00100
HINT:
Use a container to catch the fluid.
D26272
6.
INSTALL CLUTCH RELEASE CYLINDER KIT
(a)
Install the bleeder plug cap to the bleeder plug.
(b)
Install a new spring to the cylinder body.
(c)
Coat piston with lithium soap base glycol grease, as
shown in the illustration.
(d)
Install the piston to the cylinder body.
NOTICE:
Be careful not to damage the inside of the cylinder body.
(e)
Install the push rod to the cylinder body.
(f)
Install the boot to the cylinder body.
CL0672
Author :
Date :
42027–01
2227
Advertisement
Table of Contents
