14–122
10
10.
REMOVE CRANKSHAFT THRUST WASHER UPPER
11.
REMOVE CRANKSHAFT BEARING
NOTICE:
Arrange the bearings in the correct order.
12.
REMOVE CRANKSHAFT BEARING NO.2
NOTICE:
Arrange the main bearings and thrust washers in the correct order.
13.
REMOVE STUD BOLT
2002 CAMRY REPAIR MANUAL (RM881U)
ENGINE MECHANICAL
–
9.
REMOVE CRANKSHAFT
(a)
Uniformly loosen and remove the 10 bearing cap sub–as-
sembly bolts, in several passes, in the sequence shown.
(b)
Remove the bearing cap and crankshaft.
A36646
14.
INSPECT CYLINDER BLOCK FOR FLATNESS
(a)
Using a precision straight edge and feeler gauge, mea-
sure the surface contacting the cylinder head gasket for
warpage.
Maximum warpage: 0.05 mm (0.0020 in.)
A36648
CYLINDER BLOCK (2AZ–FE)
Author :
Date :
1646