Table of Contents
Advertisement
14–86
Disconnect
Hook
Pin
Plunger
Push
49.
INSTALL CYLINDER HEAD COVER SUB–ASSY
(See page 14–88)
50.
INSTALL IGNITION COIL ASSY
Torque: 9.0 N m (92 kgf cm, 80 in. lbf)
51.
INSTALL VANE PUMP ASSY
(See page 51–8)
52.
INSTALL GENERATOR ASSY
(See page 19–13)
53.
INSTALL ENGINE WIRE
54.
INSTALL FAN AND GENERATOR V BELT
(See page 14–5)
55.
INSTALL ENGINE MOUNTING BRACKET NO.2 RH
Torque: 52 N m (531 kgf cm, 38 ft lbf)
56.
INSTALL ENGINE MOUNTING STAY NO.2 RH
Torque: 64 N m (653 kgf cm, 47 ft lbf)
2002 CAMRY REPAIR MANUAL (RM881U)
ENGINE MECHANICAL
(b)
Install the crankshaft pulley (TMMK made).
(1)
SST
(2)
Torque: 170 N m (1,733 kgf cm, 125 ft lbf)
SST
A62057
(c)
Turn the crankshaft counterclockwise, and disconnect
the plunger knock pin from the hook.
Turn
A52463
(d)
Turn the crankshaft clockwise, and check that the slipper
is pushed by the plunger.
Turn
A52464
–
CHAIN (2AZ–FE)
Align the pulley set key with the key groove of the
pulley, and side on the pulley.
09960–10010 (09962–01000, 09963–01000)
Using SST, install the pulley bolt.
Author :
Date :
1610
Advertisement
Table of Contents
