Table of Contents
Advertisement
AUTOMATIC TRANSMISSION / TRANS
ADJUSTMENT
1.
INSPECT PARK/NEUTRAL POSITION SWITCH ASSY
(a)
Apply the parking brake and turn the ignition switch to ON.
(b)
Depress the brake pedal and check that the engine starts only when the shift lever is set in N or P posi-
tion.
(c)
Check that the back–up light is lit and the reverse warning buzzer sounds only when the shift lever is
set in R position.
If a failure is found, check the park/neutral position switch for continuity.
Groove
2002 CAMRY REPAIR MANUAL (RM881U)
2.
ADJUST PARK/NEUTRAL POSITION SWITCH ASSY
Neutral
(a)
Loosen the 2 bolts of park/neutral position switch and set
Basic Line
the shift lever to the N position.
(b)
Align the groove with neutral basic line.
(c)
Hold the switch in position and tighten the 2 bolts.
Torque: 5.4 N m (55 kgf cm, 48 in. lbf)
(d)
After adjustment, perform the inspection described in
step 1.
D25514
–
PARK/NEUTRAL POSITION SWITCH ASSY
Author :
40–7
4005Z–02
Date :
2082
Advertisement
Table of Contents
