Table of Contents
Advertisement
Key
Groove
Timing Marks
5
3
1
Bearing Cap No. 3
Bearing Cap No. 1
Timing Mark
2002 CAMRY REPAIR MANUAL (RM881U)
ENGINE MECHANICAL
14.
Straight
Pin
(a)
(b)
NOTICE:
A31033
Be sure not to turn the camshaft timing gear to the retard
angle side (to the right direction).
(c)
(d)
(e)
15.
Paint Mark
(a)
A52456
(b)
2
4
A52457
16.
Paint Mark
(a)
A53011
–
CAMSHAFT (2AZ–FE)
INSTALL CAMSHAFT TIMING GEAR ASSY
Put the camshaft timing gear assembly and the a cam-
shaft together with the straight pin off the key groove.
Turn the camshaft timing gear assembly to the left direc-
tion (as shown in the illustration) with pushing it lightly
against the camshaft. Push further at the position where
the pin gets into the groove.
Check that there is no clearance between the gear's
fringe and the camshaft.
Tighten the fringe bolt with the camshaft timing gear fixed.
Torque: 54 N m (551 kgf cm, 40 ft lbf)
Check that the camshaft timing gear assembly can move
to the retard angle side (to the right direction), and is
locked at the most retarded position.
INSTALL CAMSHAFT
Install the timing chain on the camshaft timing gear, with
the painted links aligned with the timing marks on the
camshaft timing sprockets.
Examine the front marks and numbers and tighten the
bolts in the order shown in the illustration.
Torque:
Bearing cap No. 1 30 N m (301 kgf cm, 22 ft lbf)
Bearing cap No. 3 9.0 N m (92 kgf cm, 80 in. lbf)
INSTALL NO.2 CAMSHAFT
Put the camshaft No.2 on the cylinder head with the
painted links of chain aligned with the timing mark on the
camshaft timing sprockets.
Author :
14–91
Date :
1615
Advertisement
Table of Contents
